Configuration

Danger

Before performing the setup procedures, it is important that you support the vehicle on jacks or blocks to prevent the drive wheels from touching the ground, allowing them to spin freely without obstruction. Doing so will prevent unattended dangerous vehicle movement.

Double-check all wiring to ensure there are no shorts and that everything is properly wired.

Be sure to wear proper eye protection in case of lead acid battery failure.

Note

There are multiple ways to configure Phoenix controllers, including loading of parameters via CAN, a handheld programmer, and/or a PC/mobile application. Refer to the Programmer instructions for details on using the specific Programmer and navigating its menus.